Chemical properties

Chemical components stainless steel		Analysis
Mat. No.	Short name DIN	C %	Si ≤ %	Mn ≤ %	P ≤ %	S≤ %	Cr %	Mo %	Ni %	Other %
1.4062	X2CrNiN2 2.2	≤ 0.03	-	< 2	-	-	22	< 0.45	2	N 0.2
1.4162		≤ 0.03	-	5	-	-	21.5	0.3	1.5	N 0.22
1.4362	X2CrNiN23-4	≤ 0.030	1.00	2.00	0.035	0.015	22.0-24.0	0.10-0.60	3.50-5.50	Cu 0.10-0.60; N 0.05-0.20
1.4462	X2CrNiMoN22-5-3	≤ 0.030	1.00	2.00	0.035	0.015	21.0-23.0	2.50-3.50	4.50-6.50	N 0.10-0.22
1.4410		0.02	-	-	-	-	25	4	7	N 0.27
1.4003	X2CrNi12 (X2CrNi11)	≤ 0.03	1.00	1.5	0.040	0.015	10.5-12.5	-	0.3-1.0	N 0.03
1.4016	X6Cr17	≤ 0.08	1.00	1.00	0.040	0.015^*1	16.0-18.0	-	-	-
1.4521	X2CrMoTi18-2	≤ 0.025	1.00	1.00	0.040	0.015	17.0-20.0	1.80-2.50	-	N ≤ 0.030; Ti4(C+N) + 0.15-0.80^*2
1.4305	X8CrNiS18-9	≤ 0.10	1.00	2.00	0.045	0.15-0.35	17.0-19.0	-	8.00-10.0	Cu ≤ 1.00; N ≤ 0.11
1.4310	X10CrNi18-8 / X12CrNi177	0.05-0.15	2.00	2.00	0.045	0.015	16.0-19.0	≤ 8.00	6.00-9.50	N 0.11
1.4301	X5CrNi18-10	≤ 0.07	1.00	2.00	0.045	0.015^*1	17.5-19.5	-	8.00-10.5	N 0.11
1.4307	X2CrNi18-9	≤ 0.030	1.00	2.00	0.045	0.015^*1	17.5-19.5	-	8.00-10.5	N 0.11
1.4541	X6CrNiTi18-10	≤ 0.08	1.00	2.00	0.045	0.015^*1	17.0-19.0	-	9.0-12.0	Ti (5xC)-0,70
1.4401	X5CrNiMo17-12-2	≤ 0.07	1.00	2.00	0.045	0.015^*1	16.5-18.5	2.00-2.50	10.0-13.0	N 0.11
1.4404	X2CrNiMo17-12-2 / X2CrNiMo17-13-2	≤ 0.030	1.00	2.00	0.045	0.015^*1	16.5-18.5	2.00-2.50	10.0-13.0	N 0.11
1.4435	X2CrNiMo18-14-3	≤ 0.030	1.00	2.00	0.045	0.015^*1	17.0-19.0	2.50-3.00	12.5-15.0	N 0.11
1.4571	X6CrNIMoTi17-12-2	≤ 0.08	1.00	2.00	0.045	0.015^*1	16.5-18.5	2.00-2.50	10.5-13.5	Ti 5 x C ≤ 0.70
1.4439	X2CrNiMoN17-13-5	≤ 0.030	1.00	2.00	0.045	0.015	16.5-18.5	4.00-5.00	12.5-14.5	N 0.12-0.22
1.4539	X1NiCrMoCu25-20-5	≤ 0.020	0.70	2.00	0.030	0.010	19.0-21.0	4.00-5.00	24.0-26.0	N ≤ 0.15; Cu 1.20-2.00
1.4529	X1NiCrMoCuN25-20-7	≤ 0.020	0.50	1.00	0.030	0.010	19.0-21.0	6.00-7.00	24.0-26.0	N 0,15-0.25; Cu 0.50-1.50
1.4547		0.01	-	-	-	-	20	6.1	18	N 0.20; Cu
1.4828	X15CrNiSi20-12	≤ 0.20	1.50-2.50	≤ 2.00	0.045	0.015	19.0-21.0	-	11.0-13.0	N 0.11
1.4841	X15CrNiSi25-21 / X15CrNiSi25-20	≤ 0.20	1.50-2.50	≤ 2.00	0.045	0.015	24.0-26.0	-	19.0-22.0	N 0.11

*1	Long products S ≤ 0.030%; For machinable products S 0.015-0.030%; To ensure weldability S 0.008-0.030%; To ensure polishability S ≤ 0.015%
*2	TI ≙ ⁷/₄ NB ≙ ⁷/₄ Zr

Keywords / Related terms: corrosion resistance, alloy, alloying constituents, microstructure, austenitic, ferritic, martensitic, mixed microstructure, duplex stainless steel, corrosion, types of corrosion, crevice corrosion, stress crack corrosion, chloride-induced, hydrogen-induced, pitting corrosion, selective corrosion, surface corrosion, PRE, pitting index, corrosion resistance, PRE calculation, PRE formula